Galaxy Audio CPTS0000 | Cricket Polarity Continuity Test Set

Galaxy Audio CPTS0000 | Cricket Polarity Continuity Test Set

$54.02

72

$54.02

72

Condition: New
Refund will be given as: Money Back
Return shipping will be paid by: Seller
Type: Polarity Continuity Test
MPN: CPTS0000
All returns accepted: Returns Accepted
Model: CPTS0000
Brand: Galaxy Audio
Item must be returned within: 60 Days

Powered by
Frooition
All Items
See our eBay store for more great items >>
Shop Categories
Other
Home and Garden
Collectibles
Instruments
Guitars, Accessories, Pedals
Electronic Drums
Recording
Pro Audio
Car Audio & Accessories
Lighting
Keyboards Digital Pianos
DJ
Acoustic Drums
Video Games & Consoles
Computers & Accessories
Galaxy Audio CPTS0000 | Cricket Polarity Continuity Test Set
Item Description
Authorized Dealer!
Galaxy Audio CPTS0000 ‘ Cricket Polarity Continuity Test Set
Overview
The CRICKET Polarity/Continuity tester is great for sound contractors, musicians, DJs, and many others. Polarity, should it become reversed, can play havoc with a sound system. If two sources are emitting the same electrical or acoustic tone (frequency), and one of those sources is in a state of inverted polarity, those tones, when combined at a given point, will cancel each other. This severely alters the sound of a system.
Polarity can be reversed while soldering cables, adding components to a sound system, reversing ‘Banana’ plugs, or replacing a component in a speaker cabinet improperly, to name a few instances. The purpose of the CRICKET is to test the polarity of a sound system each time it is used to insure it is working properly.
Galaxy Audio’s battery powered CRICKET Polarity/Continuity Test Set makes it easy to determine whether every component in an audio system from patch bay to console to speakers is in or out of polarity. The CRICKET tests balanced and unbalanced cables of up to 2,000 feet in length. It will drive a “snake” (even one with transformers), and indicate which of a microphone’s XLR connector pins is hot. The CRICKET can also plug directly into a speaker cabinet and drive the components. A glance at the CRICKET’s red and green LED’s can save hours of troubleshooting. No wonder it’s an indispensable tool for sound system owners, operators, installers, and sound rental companies.
The CRICKET Polarity Tester is a two-piece unit (‘Send’ & ‘Receive’). The Send unit generates a ‘pulse’, which is sent through the speaker, cable, microphone, or the device being tested. The Receive unit interprets that pulse and indicates if that pulse is positive or negative. The bottom of each unit has a quick reference guide on how to understand the readings given. The CRICKET Polarity Test Set is easy to use, necessary to own, and not a lot of money. The CRICKET is suggested for anybody working with sound systems.
Features
Checks continuity and polarity
1/4″ TRS and XLR in/out
Tests speakers, mics, cables and wireless systems
Tests mixers and signal processors for polarity inversions
Internal speaker for testing mic polarity
Internal mic for testing speakers
High level output for testing miles of cable
Battery test on Receive module saves troubleshooting time
CPTS CRICKET SPECIFICATIONS
CRICKET-S-SEND PULSE GENERATOR
Pulse Waveform Polarity
Positive-going balanced line output pulse, switch selectable for hi or low level balanced signal with positive pressure produced at the tip of 1/4″ jack and pin #2 of XLR jack
Speaker Output Pulse
Accepts 2 ohm (or greater) load with positive pressure produced at the tip of a 1/4″ speaker jack and positive terminal of an internal speaker
Controls
Slide switch power ON/OFF, Slide switch output Hi/Low/Spk
Dimensions
1.9″ x 3.46″ x 5.83″ (48.26 x 87.88 x 148 mm)(HxWxD)
Weight (with battery)
14.4 oz (408.2 g)
Battery
9V (Alkaline only)
CRICKET-R RECEIVE PULSE DETECTOR
LED Indicators
Green: indicates positive-going pulse polarity with power switch in “ON” position and battery status with power switch in “BAT” position.
Red: indicates negative-going pulse polarity.
Detection Inputs
One 1/4″, balanced; One XLR, balanced
Mic Sensitivity
-64dB, +3dB
Function Select
Polarity Only or Continuity
Controls
Slide switch CON/POL
Slide switch power ON/BAT/OFF
Slide switch Input MIC/2-T/3-R
Input Gain pot
Dimensions
1.9″ x 3.46″ x 6.38″ (48.26 x 87.88 x 162 mm) (HxWxD)
Weight (with battery)
14.4 oz (408.2 g)
Battery
9V (Alkaline only)
Polarity/Continuity Test
Female XLR pin 2,3,1 continuity; 1/4″ jacks: tip, ring, sleeve continuity
Test Set Shipping Weight
33.6 oz (952.5 g)
Thank you for shopping with us!
Sweetheart Deals
Helpful Links
Add to Favorite Sellers
Sign up to Newsletter
View Feedback
Contact Seller
Visit seller’s eBay Shop
About Seller Page
More Items!
View more great items
About Us
About Us
Payment
Shipping
Terms
Returns
About Us
Sweetheart Deals LLC has been a trusted seller on eBay since 1999
“We Sell Dreams” is our core philosophy and we do this with integrity and transparency.
Payment
Payment
We have set up our store to require immediate payment on most items.
Shipping
Shipping
We usually ship your item within 48 hrs of purchase!
Terms
Terms
We use PayPal to process our payments
The easiest and safe way to pay!
Returns
Returns
We PAY for all returns for up to 60 Days!
Powered by
Frooition
Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js)
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.